Skip to content
+90 850 885 27 43 info@argeict.com

Article · Cloud and infrastructure

What is a virtual private cloud (VPC)?

A virtual private cloud (VPC) is a virtual network on a cloud provider's infrastructure, dedicated to one customer, who defines its address range and access rules. This article is for people learning the concept and for IT teams comparing private cloud and VPC offers.

ARGE ICT · Published November 17, 2026

The abbreviation VPC is used in two ways. At the global cloud providers it names a networking service; it also describes the virtual environment a provider dedicates to one customer. Offers add the term private cloud, and the three get mixed up. This article defines the VPC and its components, compares it with neighboring models, and ends with its use on ARGE Cloud in Istanbul.

Definition of a virtual private cloud

A virtual private cloud (VPC) is a virtual network on a cloud provider's shared infrastructure, logically separated for a single customer. The customer defines the network's IP address range, subnets, routing, and access rules. Virtual machines and other resources run inside that network, and the rules the customer writes decide which of them can reach which.

The concept became common as a service of the public cloud providers. Amazon Web Services (AWS) calls it Amazon VPC and Google Cloud calls it VPC; the Microsoft Azure service that does the same job is Azure Virtual Network. The word private in the name refers to the network's logical separation. The physical infrastructure underneath is normally shared with the provider's other customers, so the name does not mean dedicated hardware.

Components of a VPC

Setting up a VPC involves seven concepts:

  • IP address range (CIDR block): the addresses that resources in the VPC use are defined as blocks in CIDR notation.
  • Subnet: the address range is divided into subnets, some open to the internet and some not.
  • Route table: its entries determine where traffic leaving a subnet goes.
  • Internet gateway and network address translation (NAT): these two components give a subnet its outbound path to the internet and inbound access from it.
  • Security rules: they define which source may reach which port, and are called security groups or firewall rules, depending on the provider.
  • Connection to the company network: a VPC can be linked to an on-premises network through a site-to-site VPN tunnel or a private circuit.
  • VPC peering: two VPCs are connected; test and production environments, for example, can sit in separate VPCs and be peered when needed.

Names vary by provider, the concepts are shared, and each provider's documentation covers limits and details. Whether a server can be reached from the internet depends on its subnet's routing together with the security rules. Being in a VPC does not by itself make a server open or closed.

Definition of a private cloud

NIST defines a private cloud as a model in which the cloud infrastructure is provisioned for one organization only. That organization, a third party, or both may own and operate it, on the organization's premises or off them. In a public cloud, the infrastructure is open to general use, sits on the provider's premises, and is shared by many organizations.

Built in an outside data center on hardware a provider operates, this model is called a hosted private cloud. If the provider also takes on operations, it is a managed private cloud. In both cases capacity is reserved for one organization and the provider runs the hardware. Here the word private says who uses the infrastructure; how well the data is protected depends on the measures taken.

VPC, private cloud, and public cloud compared

In a private cloud, what is dedicated is the infrastructure itself. In a virtual private cloud, it is the network; the physical infrastructure underneath is normally shared with the provider's other customers. The table sets both models next to public cloud.

Public cloudVirtual private cloud (VPC)Private cloud
Who uses the infrastructureAll of the provider's customersPhysical infrastructure is shared; the network is dedicated to one customerOne organization
Where the separation isAccount and permissionsNetwork: address range, subnets, access rulesThe infrastructure itself
Who operates itThe providerThe provider; the customer defines the network rulesThe organization or a third party
Where it runsThe provider's data centersThe provider's data centersThe organization's premises or an outside data center

Two related terms also come up in offers. In a hybrid cloud, some systems run on-premises, others in a cloud, and the two environments are connected. On this site, virtual data center means everything built in a dedicated VPC: virtual machines, the network and its firewall rules, the backup environment, and connectivity.

Which environment for which workload

Five criteria decide where a workload runs: the application's structure and dependencies, existing licenses, where the data has to be, the team's skills, and total cost. The cases below show how they steer the decision.

  • An application written around one provider's managed platform services usually stays in that provider's VPC.
  • ERP and accounting software running on application servers, database servers, and Remote Desktop Services can also run in a dedicated VPC that a provider builds and operates. The systems hosted on ARGE Cloud are of this kind.
  • If the data has to be in a particular location, look for an environment where the contract states it.
  • If a license condition or the vendor's support terms require hardware dedicated to one organization, a private cloud comes into consideration.
  • If some systems will stay on-premises, the setup is hybrid; the Hybrid cloud page explains how the two environments connect.

An offer labeled private cloud leaves two points to clarify. The first is whether the hardware is dedicated to one organization or the offer is a dedicated network on shared infrastructure. The second is who operates the operating system and the backups. For systems that process personal data, the location of the data and any transfer abroad are assessed separately under KVKK, Türkiye's Personal Data Protection Law (Law No. 6698); that assessment belongs to the organization's legal counsel. See KVKK technical measures and private cloud.

A dedicated VPC on ARGE Cloud

ARGE ICT builds a separate VPC for each customer on ARGE Cloud. We build and operate ARGE Cloud: its servers, storage, and network, along with the security layer, are ours and run in leased space inside a data center in Istanbul. The facility itself is not ours. Every VPC sits behind its own firewall, which lets through only the ports and sources defined in its rules. Internet traffic, where there is any, goes through a web application firewall (WAF) before reaching the application servers.

We design and build the VPC. First we work out how many servers are needed, the processor, memory, and disk requirements, how many users there are, and how they will connect. Then we design the resources and network to match and write the firewall rules with you. We do not expose servers directly to the internet: head office and branches connect through an IPsec tunnel, and organizations with a circuit connect over MPLS. Backups are kept outside the VPC, in a logically separate isolated backup zone. We run the operating system in the managed model, your team does in the self-managed model, and the split of responsibilities is put in writing.

Data for systems that run on ARGE Cloud is kept in Istanbul, in your dedicated VPC. That statement covers ARGE Cloud only: for anything you run with a global cloud provider, the location follows the region you select. We add a high availability (HA) cluster and a disaster recovery site (DR site) on request. We do not publish an availability figure on this site; the contract states it with its scope. The service scope is on the Virtual data center (VDC) page, and the architecture and diagram are on the ARGE Cloud page.

Our services for VPCs on Azure, AWS, and GCP

We also work on Azure, AWS, and GCP and are vendor-neutral; we decide the target environment system by system, in writing. There the provider secures the data center and the platform itself, while account settings, permissions, and data are the customer's responsibility. So we review the configuration, permissions, and network separation in your accounts with read-only access and list the misconfigured settings. Corrections are made with your approval, under separately granted access; see Cloud security. We also connect your on-premises network to the VPC over an encrypted link and migrate systems, with a written rollback plan for each stage; see Cloud migration.

Frequently asked questions

What is the difference between a VPC and a VPN? A VPN is an encrypted tunnel between two networks, or between a user and a network. A VPC is the network that resources run in, and a VPN is one way to connect to it. On ARGE Cloud, head office and branches reach the VPC through an IPsec tunnel.

Is a VPC the same as a virtual server (VPS)? No. A virtual server is a single server; it is also sold as a VPS or a cloud server. A VPC is the network environment servers run in, with its addresses and access rules defined. One VPC can hold many virtual servers.

Can servers in a VPC be reached from the internet? It depends. The server's subnet routing and the security rules decide; one VPC can hold servers that are open to the internet and servers that are not. On ARGE Cloud, servers are not opened directly to the internet; access comes over an encrypted tunnel or a private circuit. Traffic for an internet-facing application goes through the WAF.

Is a private cloud more secure than a public cloud? Not by itself. An environment is protected by the measures taken and by correct configuration, in either model. A global cloud provider protects its own data center and platform; account settings, permissions, and data are left to the customer. Storage left open to the public or a port left open by mistake is an example of misconfiguration.

How does a VPC on ARGE Cloud differ from a VPC on AWS or Azure? In both, the VPC is dedicated to a single customer and has its own access rules. On a global provider, the customer defines the network and the rules. We operate ARGE Cloud in a data center in Istanbul, design and build the VPC ourselves, and write the rules with you. Which environment fits is decided with you, based on the application's structure and where the data has to be.

Sources

  • NIST SP 800-145, The NIST Definition of Cloud Computing, NIST (nist.gov)
  • What is Amazon VPC?, Amazon Web Services (docs.aws.amazon.com)
  • Virtual Private Cloud (VPC) overview, Google Cloud (docs.cloud.google.com)
  • What is Azure Virtual Network?, Microsoft Learn (learn.microsoft.com)

Expert call about a VPC on ARGE Cloud

Tell us which systems you are thinking of moving, where they run today (on-premises or on a global cloud), and any data location requirement you have; we respond to your request within one business day.

Speak to an expert